polymer extrusion device sintered powder filter disc-XINXIANG ZWEN FILTER CO.,LTD

Polymer Extrusion Device Sintered Powder Filter Disc

Polymer_Extrusion_Device_Sintered_Powder_Filter_Disc.jpg

Polymer Extrusion Device Sintered Powder Filter Disc Technical Data

Raw Material: SS 316L, Titanium

Filter Rating Range: 0.22 Micron ~ 100 Microns

Filter Efficiency: > 99.9 %

Operation Temperature: ≤ 816 ℃

Diameter: ≤ 400 mm

Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm

Polymer Extrusion Device Sintered Powder Filter Disc Feature

1. Polymer extrusion device sintered powder filter disc is made from stainless steel powder particle or titanium powder particle

2. Polymer extrusion device sintered powder filter disc is sintered in a high temperature vacuum furnace

3. Polymer extrusion device sintered powder filter disc is depth filtration

4. Polymer extrusion device sintered powder filter disc has narrow pore size distribution

5. Stainless steel powder particle or titanium powder particle will not shed in the filtration process

6. High dirt holding capacity

7. High porosity

8. High filter rating accuracy

9. The effect of filtration is good

10. High filter efficiency

11. Good permeability

12. Pressure loss is low in the filtration process

13. High flow rate at low differential pressure

14. High compression strength

15. High mechanical strength

16. High abrasion resistance

17. High durability against most liquids, gases and aggressive steam

18. High temperature resistance

19. High corrosion resistance

20. Backwash

21. Washable and Cleanable

22. Reusable

23. Long service life

About Us

XINXIANG ZWEN FILTER CO.,LTD produces sintered powder filter candle, sintered powder filter cartridge, sintered powder filter element, sintered powder filter disc, sintered powder filter disk, sintered powder filter pipe, sintered powder filter plate, sintered powder filter rod, sintered powder filter sheet, and sintered powder filter tube.